Lubricate dry – bike 7 – ultra-thin chain lubricant


Lubricate Dry


After a thorough cleaning, your bike also needs to be lubricated.
Most lubricants are not pressure resistant.
This means that the lubrication effect is lost as soon as it is put under pressure.
So choose a durable lubrication with Lubricate.
Lubricate is a transparent PTFE-based lubricant for eliminating prolonged friction.
Lubricate Dry is an ultra-thin lubricant with a high penetrating power for deep lubrication.
The Dry version is less sticky than Lubricate Wet.


Especially for racing bikes that thend to get less dirty after a ride than e.g. mountain bikes.
Suitable for dry and damp race courses.

More Information ...


  • When applied to the chain links, the oil is very liquid in order to penetrate better into the chain and ensure that each axis of each link is well lubricated.
  • After a few minutes, the oil solidifies and adheres so that it does not run out of the chain when you are riding and continues to lubricate optimally even during long rides.
  • Since there is also some of that adhering oil on the outside of the chain, before riding or after a few minutes after lubricating (about ten for the spray cans, 3-4min for the Quick version), run the chain in a cloth to remove the oil on the outside of the chain so that your chain stays clean while riding.
  • It is recommended to degrease the transmission with Degrease or Chain Clean after a ride/race and apply a fresh layer of Lubricate.

Nb: It is always best to apply oil at the bottom behind the chainring. That way there is no oil running into the cassette and you avoid contact with the brake discs.